RelFixTM
Strong structural bonding
with wood-like materials
Solvent-free and
environmentally safe
Pre-weighted packing
for easy application
Excellent stiffness and dimensional stability
Can be cut, drilled, or planed after curing
Make sure that the Surface should be clean of Oil, Grease, dust & any other material which will affect the adhesion of RelFixTM EP Putty to Substrate.
The moisture content of the substrate should not be more than 4%. Moisture content will affect the adhesion properties. The application area should be dried well before application if the moisture content is higher than the recommended level. We won’t recommend the usage of RelFixTM Lami on moist surface.
Mix the RelFixTM in the recommended ratio (Resin: Hardener = 100:65 parts by weight) for about 2-3 minutes.
You can use the material for about 30-40 Minutes if the surrounding temperature is around 30˚C.
Apply a thin layer on RelFixTM Lami over both the surfaces which needs to joint together using Spatula or trowel. Now put the RelfixTM Lami applied surfaces on each other.
The coverage of RelfixTM is 2 Kg for gluing 2 (8 x 4 feet) Sheets of RelWOOD® to each other. (i.e. 330-350 gms RelFixTM per Sq.m)
Provide the appropriate support after placing the surfaces in contact with other.
If the application is horizontal, then put the sufficient quantity of weights on the substrate. You can also use screw or fastener for similar purpose instead of weights.
- If the application is vertical or cladding type, then provide the support using screw or recommended fastener.
- Once you put the weight or provide the appropriate support to the substrate the excess material will come out, wipe out the excess material with the help of trowel before it gets hard.
Let it dry for overnight.
Use the mechanical mixer with low stirring speed for better mixing. Mix till the uniform color is achieved.
Though the setting time is 4-6 Hours, we recommend overnight drying for better adhesion.
