RelFixTM Lami
Key Features
High-performance adhesion
for laminates and veneers
Enhances structural integrity of bonded surfaces
Provides superior resistance to temperature & humidity variations
Prevents warping and delamination
Application Guide
Make sure that the Surface should be clean of Oil, Grease, dust & any other material which will affect the adhesion of RelFixTM Lami to Substrate.
The moisture content of the substrate should not be more than 4%. Moisture content will affect the adhesion properties. The application area should be dried well before application if the moisture content is higher than the recommended level. We won’t recommend the usage of RelFixTM Lami on moist surface.
Mix the RelFixTM Lami in the recommended ratio (Resin: Hardener = 100:100 parts by weight) for about 2-3 minutes. (Use the mechanical mixer with low stirring speed for better mixing. Mix till the uniform color is achieved.)
You can use the material for about 30-40 Minutes if the surrounding temperature is around 30˚C.
Apply a thin layer on RelFixTM Lami over both the surfaces which needs to joint together using Spatula or trowel. Now put the RelfixTM Lami applied surfaces on each other.
The coverage of RelfixTM Lami for Sheets of RelWOOD® to each other. (i.e. RelFixTM Lami 1 kg per 2 -3 Sq.m)
Provide the appropriate support after placing the surfaces in contact with other - If the application is horizontal, then put the sufficient quantity of weights on the substrate. You can also use screw or fastener for similar purpose instead of weights. - If the application is vertical or cladding type, then provide the support using screw or recommended fastener.
Once you put the weight or provide the appropriate support to the substrate the excess material will come out, wipe out the excess material with the help of trowel before it gets hard.
Let it dry for overnight. (Though the setting time is 4-6 Hours, we recommend overnight drying for better adhesion.)
